The commonly used polishing methods for stainless steel belts include mechanical polishing, chemical polishing, and electrochemical polishing. These three methods each have their own advantages and disadvantages.

      1. Mechanical polishing.

      The advantage is that the finished part has good leveling and high brightness. The defects are that the labor intensity is high, the pollution is severe, and the messy parts cannot be processed, and the gloss cannot be common, and the gloss persists for a long time, and is boring and rusting. Compare suitable processing parts, medium and small commodities.

      2. Chemical polishing.

      Its strength is that the processing equipment is less invested, the messy parts can be thrown, the speed is fast, the efficiency is high, and the corrosion resistance is good. The defect is that the brightness is poor, there is gas overflow, ventilation equipment is required, and heating is difficult. It is suitable for processing small batches of messy parts and small parts with low brightness requirements.

      3, electrochemical polishing

      Its strength is that the gloss of the mirror is long, the process is stable, the pollution is low, the cost is low, and the corrosion resistance is good. The defects are high anti-pollution, large-scale processing equipment, and tooling and auxiliary electrodes for messy parts, and cooling equipment for mass production. Suitable for mass production, mainly used in high-grade goods, export goods, and public goods, the processing technology is stable and the operation is simple.